Bulb Timer display broken during exposure
Created originally on Bitbucket by WalterSchulz (Walter Schulz)
Switch to bulb mode (mode dial). Open ML menu -> Shoot -> Bulb Timer -> Q Select Exposure duration = 10 seconds (error not exclusive for this value)
Test a): Use default setting "Display during exposure Don't change"
Leave menu by short half-shutter press. Then activate Bulb Timer by long half-shutter press. Screen messages appear (2 seconds delay ...
Error: There should be a timer showing up (lower right corner?) displaying actual exposure time (incrementing). Not visible.
Image aquisition works.
Test b): Use setting "Display during exposure Show previous pic"
Leave menu by short half-shutter press. Then activate Bulb Timer by long half-shutter press. Screen messages appear (2 seconds delay ...
There should be
- Last pic showing up -> Not there
- A counter in the lower right corner incrementing actual exposure time -> Not there
- A screen message in upper left area "Remaining ..." decrementing time during exposure -> Shows up during first and -sometimes - second pics taken, will not be seen in consecutive shots.
Image aquisition works.
Tested with 650D: Works as designed here. Tested with build #3 (closed): Error exists there, too Unknown if other Digic IV cams are affected.