Skip to content
Snippets Groups Projects
nginx.md 27.3 KiB
Newer Older
stage: Systems
group: Distribution
info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://handbook.gitlab.com/handbook/product/ux/technical-writing/#assignments
# NGINX settings

DETAILS:
**Tier:** Free, Premium, Ultimate
**Offering:** Self-managed
## Service-specific NGINX settings

Users can configure NGINX settings differently for different services via
`gitlab.rb`. Settings for the GitLab Rails application can be configured using the
`nginx['<some setting>']` keys. There are similar keys for other services like
`pages_nginx`, `mattermost_nginx` and `registry_nginx`. All the configurations
available for `nginx` are also available for these `<service_nginx>` settings and
share the same default values as GitLab NGINX.

To operate NGINX for isolated services like Mattermost, you should use `gitlab_rails['enable'] = false` instead of `nginx['enable'] = false`.
For more information, see [Running GitLab Mattermost on its own server](https://docs.gitlab.com/ee/integration/mattermost/#running-gitlab-mattermost-on-its-own-server).

If modifying via `gitlab.rb`, users have to configure NGINX setting for each
service separately. Settings given via `nginx['foo']` WILL NOT be replicated to
service specific NGINX configuration (as `registry_nginx['foo']` or
`mattermost_nginx['foo']`, etc.). For example, to configure HTTP to HTTPS
redirection for GitLab, Mattermost and Registry, the following settings should

```ruby
nginx['redirect_http_to_https'] = true
registry_nginx['redirect_http_to_https'] = true
mattermost_nginx['redirect_http_to_https'] = true
```

Modifying NGINX configuration should be done with care as incorrect
or incompatible configuration may yield to unavailability of service.

By default, Linux package installations do not use HTTPS. If you want to enable HTTPS for
`gitlab.example.com`, you can:
- [Use Let's Encrypt for free, automated HTTPS](ssl/index.md#enable-the-lets-encrypt-integration).
- [Manually configure HTTPS with your own certificates](ssl/index.md#configure-https-manually).
NOTE:
If you use a proxy, load balancer or some other external device to terminate SSL for the GitLab host name,
see [External, proxy, and load balancer SSL termination](ssl/index.md#configure-a-reverse-proxy-or-load-balancer-ssl-termination).
## Change the default proxy headers

By default, when you specify `external_url`, a Linux package installation sets a few
NGINX proxy headers that are assumed to be sane in most environments.

For example, a Linux package installation sets:
  "X-Forwarded-Proto" => "https",
  "X-Forwarded-Ssl" => "on"
```

if you have specified `https` schema in the `external_url`.

However, if you have a situation where your GitLab is in a more complex setup
like behind a reverse proxy, you will need to tweak the proxy headers in order
to avoid errors like `The change you wanted was rejected` or
`Can't verify CSRF token authenticity Completed 422 Unprocessable`.

This can be achieved by overriding the default headers, eg. specify
in `/etc/gitlab/gitlab.rb`:

```ruby
 nginx['proxy_set_headers'] = {
  "X-Forwarded-Proto" => "http",
  "CUSTOM_HEADER" => "VALUE"
 }
```

Save the file and [reconfigure GitLab](https://docs.gitlab.com/ee/administration/restart_gitlab.html#omnibus-gitlab-reconfigure)
for the changes to take effect.

This way you can specify any header supported by NGINX you require.

## Configuring GitLab `trusted_proxies` and the NGINX `real_ip` module
By default, NGINX and GitLab will log the IP address of the connected client.

If your GitLab is behind a reverse proxy, you may not want the IP address of
the proxy to show up as the client address.

You can have NGINX look for a different address to use by adding your reverse
proxy to the `real_ip_trusted_addresses` list:

```ruby
# Each address is added to the the NGINX config as 'set_real_ip_from <address>;'
nginx['real_ip_trusted_addresses'] = [ '192.168.1.0/24', '192.168.2.1', '2001:0db8::/32' ]
# other real_ip config options
nginx['real_ip_header'] = 'X-Forwarded-For'
```

Description of the options:

- <http://nginx.org/en/docs/http/ngx_http_realip_module.html>
By default, Linux package installations use the IP addresses in `real_ip_trusted_addresses`
as GitLab trusted proxies, which will keep users from being listed as signed
Save the file and [reconfigure GitLab](https://docs.gitlab.com/ee/administration/restart_gitlab.html#omnibus-gitlab-reconfigure)
for the changes to take effect.

## Configuring the PROXY protocol

If you want to use a proxy like HAProxy in front of GitLab using the [PROXY protocol](https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt),
you need to enable this setting. Do not forget to set the `real_ip_trusted_addresses` also as needed:

1. Edit `/etc/gitlab/gitlab.rb`:

   ```ruby
   # Enable termination of ProxyProtocol by NGINX
   nginx['proxy_protocol'] = true
   # Configure trusted upstream proxies. Required if `proxy_protocol` is enabled.
   nginx['real_ip_trusted_addresses'] = [ "127.0.0.0/8", "IP_OF_THE_PROXY/32"]
   ```

1. Save the file and
   [reconfigure GitLab](https://docs.gitlab.com/ee/administration/restart_gitlab.html#omnibus-gitlab-reconfigure)
   for the changes to take effect.

Once enabled, NGINX only accepts PROXY protocol traffic on these listeners.
Ensure to also adjust any other environments you might have, like monitoring checks.

## Using a non-bundled web-server

By default, the Linux package installs GitLab with bundled NGINX.
Linux package installations allow webserver access through the `gitlab-www` user, which resides
in the group with the same name. To allow an external webserver access to
GitLab, the external webserver user needs to be added to the `gitlab-www` group.
To use another web server like Apache or an existing NGINX installation you
will have to perform the following steps:

1. **Disable bundled NGINX**
   In `/etc/gitlab/gitlab.rb` set:
   ```ruby
   nginx['enable'] = false
   ```

1. **Set the username of the non-bundled web-server user**
   By default, Linux package installations have no default setting for the external webserver
   user, you have to specify it in the configuration. For Debian/Ubuntu the
   default user is `www-data` for both Apache/NGINX whereas for RHEL/CentOS
   the NGINX user is `nginx`.
   Make sure you have first installed Apache/NGINX so the webserver user is created, otherwise a Linux package installation
   fails while reconfiguring.
   Let's say for example that the webserver user is `www-data`.
   In `/etc/gitlab/gitlab.rb` set:
   ```ruby
   web_server['external_users'] = ['www-data']
   ```
   This setting is an array so you can specify more than one user to be added to `gitlab-www` group.
   Run `sudo gitlab-ctl reconfigure` for the change to take effect.
   If you are using SELinux and your web server runs under a restricted SELinux profile you may have to [loosen the restrictions on your web server](https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache#selinux-modifications).
   Make sure that the webserver user has the correct permissions on all directories used by external web-server, otherwise you will receive `failed (XX: Permission denied) while reading upstream` errors.
1. **Add the non-bundled web-server to the list of trusted proxies**

   Normally, Linux package installations default the list of trusted proxies to what was
   configured in the `real_ip` module for the bundled NGINX.
   For non-bundled web-servers the list needs to be configured directly, and should
   include the IP address of your web-server if it is not on the same machine as GitLab.
   Otherwise, users will be shown as being signed in from your web-server's IP address.
   ```ruby
   gitlab_rails['trusted_proxies'] = [ '192.168.1.0/24', '192.168.2.1', '2001:0db8::/32' ]
   ```
1. **(Optional) Set the right GitLab Workhorse settings if using Apache**
   Apache cannot connect to a UNIX socket but instead needs to connect to a
   TCP Port. To allow GitLab Workhorse to listen on TCP (by default port 8181)
   edit `/etc/gitlab/gitlab.rb`:
   gitlab_workhorse['listen_network'] = "tcp"
   gitlab_workhorse['listen_addr'] = "127.0.0.1:8181"
   ```
   Run `sudo gitlab-ctl reconfigure` for the change to take effect.
1. **Download the correct web server configuration**
   Go to [GitLab repository](https://gitlab.com/gitlab-org/gitlab/-/tree/master/lib/support/nginx) and download
   the required configuration. Select the correct configuration file depending whether you are serving GitLab with
   SSL or not. You might need to make some changes, such as:

   - The value of `YOUR_SERVER_FQDN` set to your FQDN.
   - If you use SSL, the location of your SSL keys.
   - The location of your log files.
## Setting the NGINX listen address or addresses

By default NGINX will accept incoming connections on all local IPv4 addresses.
You can change the list of addresses in `/etc/gitlab/gitlab.rb`.

```ruby
 # Listen on all IPv4 and IPv6 addresses
nginx['listen_addresses'] = ["0.0.0.0", "[::]"]
registry_nginx['listen_addresses'] = ['*', '[::]']
mattermost_nginx['listen_addresses'] = ['*', '[::]']
pages_nginx['listen_addresses'] = ['*', '[::]']
## Setting the NGINX listen port

By default NGINX will listen on the port specified in `external_url` or
implicitly use the right port (80 for HTTP, 443 for HTTPS). If you are running
GitLab behind a reverse proxy, you may want to override the listen port to
Evan Read's avatar
Evan Read committed
something else. For example, to use port 8081:
nginx['listen_port'] = 8081
## Verbosity level of NGINX logs

By default NGINX will log at the `error` verbosity level. You may log at a different level
by changing the log level. For example, to enable `debug` logging:

```ruby
nginx['error_log_level'] = "debug"
```

Valid values can be found from the [NGINX documentation](https://nginx.org/en/docs/ngx_core_module.html#error_log).

## Setting the Referrer-Policy header

By default, GitLab sets the `Referrer-Policy` header to `strict-origin-when-cross-origin` on all responses.

This makes the client send the full URL as referrer when making a same-origin request but only send the
origin when making cross-origin requests.

To set this header to a different value:

```ruby
nginx['referrer_policy'] = 'same-origin'
```

You can also disable this header to make the client use its default setting:

```ruby
nginx['referrer_policy'] = false
```

Note that setting this to `origin` or `no-referrer` would break some features in GitLab that require the full referrer URL.

- <https://www.w3.org/TR/referrer-policy/>
## Disabling Gzip compression
Stan Hu's avatar
Stan Hu committed

By default, GitLab enables Gzip compression for text data over 10240 bytes. To
Stan Hu's avatar
Stan Hu committed
disable this behavior:

```ruby
nginx['gzip_enabled'] = false
```

The `gzip` setting only works for the main GitLab application and not for the other services.
## Disabling proxy request buffering

Request buffering can be disabled selectively on specific locations by changing `request_buffering_off_path_regex`.

1. Edit `/etc/gitlab/gitlab.rb`:

   ```ruby
   nginx['request_buffering_off_path_regex'] = "/api/v\\d/jobs/\\d+/artifacts$|/import/gitlab_project$|\\.git/git-receive-pack$|\\.git/gitlab-lfs/objects|\\.git/info/lfs/objects/batch$"
   ```

1. Reconfigure GitLab, and [HUP](https://nginx.org/en/docs/control.html)
   NGINX to cause it to reload with the updated configuration gracefully:

   ```shell
   sudo gitlab-ctl reconfigure
   sudo gitlab-ctl hup nginx
   ```

## Configure `robots.txt`

To configure [`robots.txt`](https://www.robotstxt.org/robotstxt.html) for your instance, specify a custom `robots.txt` file by adding a [custom NGINX configuration](#inserting-custom-nginx-settings-into-the-gitlab-server-block):

1. Edit `/etc/gitlab/gitlab.rb`:

   ```ruby
   nginx['custom_gitlab_server_config'] = "\nlocation =/robots.txt { alias /path/to/custom/robots.txt; }\n"
   ```

1. Reconfigure GitLab:

   ```shell
   sudo gitlab-ctl reconfigure
   ```

## Inserting custom NGINX settings into the GitLab server block

Please keep in mind that these custom settings may create conflicts if the
same settings are defined in your `gitlab.rb` file.

If you need to add custom settings into the NGINX `server` block for GitLab for
some reason you can use the following setting.

```ruby
# Example: block raw file downloads from a specific repository
nginx['custom_gitlab_server_config'] = "location ^~ /foo-namespace/bar-project/raw/ {\n deny all;\n}\n"
```

Run `gitlab-ctl reconfigure` to rewrite the NGINX configuration and restart
NGINX.
This inserts the defined string into the end of the `server` block of
`/var/opt/gitlab/nginx/conf/gitlab-http.conf`.

Marcel Amirault's avatar
Marcel Amirault committed
### Notes
- If you're adding a new location, you might need to include
  ```conf
  proxy_cache off;
  proxy_http_version 1.1;
  proxy_pass http://gitlab-workhorse;
  ```
  in the string or in the included NGINX configuration. Without these, any sub-location
  will return a 404. See
  [GitLab CE Issue #30619](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/30619).
- You cannot add the root `/` location or the `/assets` location as those already
  exist in `gitlab-http.conf`.
## Inserting custom settings into the NGINX configuration
If you need to add custom settings into the NGINX configuration, for example to include
existing server blocks, you can use the following setting.

```ruby
# Example: include a directory to scan for additional config files
nginx['custom_nginx_config'] = "include /etc/gitlab/nginx/sites-enabled/*.conf;"
You should create custom server blocks in the `/etc/gitlab/nginx/sites-available` directory. To enable them, symlink them into the
`/etc/gitlab/nginx/sites-enabled` directory:

1. Create the `/etc/gitlab/nginx/sites-enabled` directory.
1. Run the following command:

   ```shell
   sudo ln -s /etc/gitlab/nginx/sites-available/example.conf /etc/gitlab/nginx/sites-enabled/example.conf
   ```

You can add domains for server blocks [as an alternative name](ssl/index.md#add-alternative-domains-to-the-certificate)
to the generated Let's Encrypt SSL certificate.

Run `gitlab-ctl reconfigure` to rewrite the NGINX configuration and restart
NGINX. You must reload NGINX (`gitlab-ctl hup nginx`) or restart NGINX (`gitlab-ctl restart nginx`) whenever you make changes to the custom server blocks.
This inserts the defined string into the end of the `http` block of
`/var/opt/gitlab/nginx/conf/nginx.conf`.

Custom NGINX settings inside the `/etc/gitlab/` directory are backed up to `/etc/gitlab/config_backup/`
during an upgrade and when `sudo gitlab-ctl backup-etc` is manually executed.
You can use `custom_error_pages` to modify text on the default GitLab error page.
This can be used for any valid HTTP error code; e.g 404, 502.

As an example the following would modify the default 404 error page.
nginx['custom_error_pages'] = {
  '404' => {
    'title' => 'Example title',
    'header' => 'Example header',
    'message' => 'Example message'
  }
}
```

This would result in the 404 error page below.

![custom 404 error page](img/error_page_example.png)

Run `gitlab-ctl reconfigure` to rewrite the NGINX configuration and restart
NGINX.

## Using an existing Passenger/NGINX installation
In some cases you may want to host GitLab using an existing Passenger/NGINX
installation but still have the convenience of updating and installing using
the Linux packages.
When disabling NGINX, you won't be able to access other services included in a Linux package installation such as
Mattermost unless you manually add them in `nginx.conf`.
First, you'll need to setup your `/etc/gitlab/gitlab.rb` to disable the built-in
# Define the external url
external_url 'http://git.example.com'

# Disable the built-in nginx
nginx['enable'] = false

# Disable the built-in puma
puma['enable'] = false

# Set the internal API URL
gitlab_rails['internal_api_url'] = 'http://git.example.com'

# Define the web server process user (ubuntu/nginx)
web_server['external_users'] = ['www-data']
```

Make sure you run `sudo gitlab-ctl reconfigure` for the changes to take effect.

In your custom Passenger/NGINX installation, create the following site configuration file:
upstream gitlab-workhorse {
  server unix://var/opt/gitlab/gitlab-workhorse/sockets/socket fail_timeout=0;
  server_tokens off;
  root /opt/gitlab/embedded/service/gitlab-rails/public;

  client_max_body_size 250m;

  access_log  /var/log/gitlab/nginx/gitlab_access.log;
  error_log   /var/log/gitlab/nginx/gitlab_error.log;

  # Ensure Passenger uses the bundled Ruby version
  passenger_ruby /opt/gitlab/embedded/bin/ruby;

  # Correct the $PATH variable to included packaged executables
  passenger_env_var PATH "/opt/gitlab/bin:/opt/gitlab/embedded/bin:/usr/local/bin:/usr/bin:/bin";

  # Make sure Passenger runs as the correct user and group to
  # prevent permission issues
  passenger_user git;
  passenger_group git;

  # Enable Passenger & keep at least one instance running at all times
  passenger_enabled on;
  passenger_min_instances 1;

  location ~ ^/[\w\.-]+/[\w\.-]+/(info/refs|git-upload-pack|git-receive-pack)$ {
    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
    error_page 418 = @gitlab-workhorse;
    return 418;
  }

  location ~ ^/[\w\.-]+/[\w\.-]+/repository/archive {
    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
    error_page 418 = @gitlab-workhorse;
    return 418;
  }

  location ~ ^/api/v3/projects/.*/repository/archive {
    # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
    error_page 418 = @gitlab-workhorse;
    return 418;
  }

  # Build artifacts should be submitted to this location
  location ~ ^/[\w\.-]+/[\w\.-]+/builds/download {
      client_max_body_size 0;
      # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
      error_page 418 = @gitlab-workhorse;
      return 418;
  }

  # Build artifacts should be submitted to this location
  location ~ /ci/api/v1/builds/[0-9]+/artifacts {
      client_max_body_size 0;
      # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
      error_page 418 = @gitlab-workhorse;
      return 418;
  }
  # Build artifacts should be submitted to this location
  location ~ /api/v4/jobs/[0-9]+/artifacts {
      client_max_body_size 0;
      # 'Error' 418 is a hack to re-use the @gitlab-workhorse block
      error_page 418 = @gitlab-workhorse;
      return 418;
  }

  # For protocol upgrades from HTTP/1.0 to HTTP/1.1 we need to provide Host header if its missing
  # use one of values defined in server_name
    set $http_host_with_default "git.example.com";
  }

  if ($http_host != "") {
    set $http_host_with_default $http_host;
  }

  location @gitlab-workhorse {

    ## https://github.com/gitlabhq/gitlabhq/issues/694
    ## Some requests take more than 30 seconds.
    proxy_connect_timeout   300;
    proxy_redirect          off;

    # Do not buffer Git HTTP responses
    proxy_buffering off;

    proxy_set_header    Host                $http_host_with_default;
    proxy_set_header    X-Real-IP           $remote_addr;
    proxy_set_header    X-Forwarded-For     $proxy_add_x_forwarded_for;
    proxy_set_header    X-Forwarded-Proto   $scheme;

    proxy_http_version 1.1;
    proxy_pass http://gitlab-workhorse;

    ## The following settings only work with NGINX 1.7.11 or newer
    ## Pass chunked request bodies to gitlab-workhorse as-is
    # proxy_request_buffering off;
    # proxy_http_version 1.1;
  }

  ## Enable gzip compression as per rails guide:
  ## http://guides.rubyonrails.org/asset_pipeline.html#gzip-compression
  ## WARNING: If you are using relative urls remove the block below
  ## See config/application.rb under "Relative url support" for the list of
  ## other files that need to be changed for relative url support
  location ~ ^/(assets)/ {
    root /opt/gitlab/embedded/service/gitlab-rails/public;
    gzip_static on; # to serve pre-gzipped version
    expires max;
    add_header Cache-Control public;
  error_page 502 /502.html;
}
```
Don't forget to update `git.example.com` in the above example to be your server URL.
If you wind up with a 403 forbidden, it's possible that you haven't enabled passenger in `/etc/nginx/nginx.conf`,
to do so simply uncomment:
Then run `sudo service nginx reload`.
## Enabling/Disabling `nginx_status`
By default you will have an NGINX health-check endpoint configured at `127.0.0.1:8060/nginx_status` to monitor your NGINX server status.
Marcel Amirault's avatar
Marcel Amirault committed
### The following information will be displayed
Active connections: 1
server accepts handled requests
 18 18 36
Reading: 0 Writing: 1 Waiting: 0
```

- Active connections – Open connections in total.
- 3 figures are shown.
  - All accepted connections.
  - All handled connections.
  - Total number of handled requests.
- Reading: NGINX reads request headers
- Writing: NGINX reads request bodies, processes requests, or writes responses to a client
- Waiting: Keep-alive connections. This number depends on the keepalive-timeout.
Ben Bodenmiller's avatar
Ben Bodenmiller committed
### Configuration options
nginx['status'] = {
  "listen_addresses" => ["127.0.0.1"],
  "fqdn" => "dev.example.com",
  "port" => 9999,
  "options" => {
    "access_log" => "on", # Disable logs for stats
    "allow" => "127.0.0.1", # Only allow access from localhost
    "deny" => "all" # Deny access to anyone else
  }
}
```

If you don't find this service useful for your current infrastructure you can disable it with:

```ruby
Make sure you run `sudo gitlab-ctl reconfigure` for the changes to take effect.
To ensure that user uploads are accessible your NGINX user (usually `www-data`)
should be added to the `gitlab-www` group. This can be done using the following command:

```shell
sudo usermod -aG gitlab-www www-data
```

Ben Bodenmiller's avatar
Ben Bodenmiller committed
## Templates
Other than the Passenger configuration in place of Puma and the lack of HTTPS
Evan Read's avatar
Evan Read committed
(although this could be enabled) these files are mostly identical to:
Evan Read's avatar
Evan Read committed
- [Bundled GitLab NGINX configuration](https://gitlab.com/gitlab-org/omnibus-gitlab/tree/master/files/gitlab-cookbooks/gitlab/templates/default/nginx-gitlab-http.conf.erb)
Don't forget to restart NGINX to load the new configuration (on Debian-based
systems `sudo service nginx restart`).

Ben Bodenmiller's avatar
Ben Bodenmiller committed
## Troubleshooting
Ben Bodenmiller's avatar
Ben Bodenmiller committed
### 400 Bad Request: too many Host headers
Make sure you don't have the `proxy_set_header` configuration in
`nginx['custom_gitlab_server_config']` settings and instead use the
['proxy_set_headers'](ssl/index.md#configure-a-reverse-proxy-or-load-balancer-ssl-termination) configuration in your `gitlab.rb` file.
Evan Read's avatar
Evan Read committed
### `javax.net.ssl.SSLHandshakeException: Received fatal alert: handshake_failure`
Linux package installations don't support TLSv1 protocol by default.
This can cause connection issues with some older Java based IDE clients when interacting with
your GitLab instance.
We strongly urge you to upgrade ciphers on your server, similar to what was mentioned
in [this user comment](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/624#note_299061).

If it is not possible to make this server change, you can default back to the old
Yoginth's avatar
Yoginth committed
behavior by changing the values in your `/etc/gitlab/gitlab.rb`:
nginx['ssl_protocols'] = "TLSv1 TLSv1.1 TLSv1.2 TLSv1.3"
### Mismatch between private key and certificate

If you see `x509 certificate routines:X509_check_private_key:key values mismatch)` in the NGINX logs (`/var/log/gitlab/nginx/current` by default for Omnibus), there is a mismatch between your private key and certificate.

To fix this, you will need to match the correct private key with your certificate.

To ensure you have the correct key and certificate, you can ensure that the modulus of the private key and certificate match:

```shell
/opt/gitlab/embedded/bin/openssl rsa -in /etc/gitlab/ssl/gitlab.example.com.key -noout -modulus | /opt/gitlab/embedded/bin/openssl sha256
/opt/gitlab/embedded/bin/openssl x509 -in /etc/gitlab/ssl/gitlab.example.com.crt -noout -modulus| /opt/gitlab/embedded/bin/openssl sha256
```

Once you verify that they match, you will need to reconfigure and reload NGINX:

```shell
sudo gitlab-ctl reconfigure
sudo gitlab-ctl hup nginx
```
Kati Paizee's avatar
Kati Paizee committed
If you see `Request Entity Too Large` in the [NGINX logs](https://docs.gitlab.com/ee/administration/logs/index.html#nginx-logs),
you will need to increase the [Client Max Body Size](http://nginx.org/en/docs/http/ngx_http_core_module.html#client_max_body_size).
You may encounter this error if you have increased the [Max import size](https://docs.gitlab.com/ee/administration/settings/account_and_limit_settings.html#max-import-size).
In a Kubernetes-based GitLab installation, this setting is
[named differently](https://docs.gitlab.com/charts/charts/gitlab/webservice/#proxybodysize).

To increase the `client_max_body_size`, you will need to set the value in your `/etc/gitlab/gitlab.rb`:

```ruby
nginx['client_max_body_size'] = '250m'
```

Make sure you run `sudo gitlab-ctl reconfigure` and run `sudo gitlab-ctl hup nginx` to cause NGINX to
Takuya Noguchi's avatar
Takuya Noguchi committed
[reload the with the updated configuration](http://nginx.org/en/docs/control.html)
To increase the `client_max_body_size`:

1. Edit `/etc/gitlab/gitlab.rb` and set the preferred value:

   ```ruby
   nginx['client_max_body_size'] = '250m'
   ```

1. Reconfigure GitLab, and [HUP](https://nginx.org/en/docs/control.html)
   NGINX to cause it to reload with the updated configuration gracefully:

   ```shell
   sudo gitlab-ctl reconfigure
   sudo gitlab-ctl hup nginx
   ```
DJ Mountney's avatar
DJ Mountney committed
### Security scan is showing a "NGINX HTTP Server Detection" warning

Some security scanners detect issues when they see the `Server: nginx` http header. Most scanners with this alert will
notify as `Low` or `Info` severity. [See Nessus as an example](https://www.tenable.com/plugins/nessus/106375).

We recommend ignoring this warning, as the benefit of removing the header is low, and its presence
[helps support the NGINX project in usage statistics](https://trac.nginx.org/nginx/ticket/1644). We do provide a way to turn off the
header with `hide_server_tokens`:

DJ Mountney's avatar
DJ Mountney committed
1. Edit `/etc/gitlab/gitlab.rb` and set the value:

   ```ruby
   nginx['hide_server_tokens'] = 'on'
   ```

1. Reconfigure GitLab, and [hup](https://nginx.org/en/docs/control.html)
   NGINX to cause it to reload the with the updated configuration gracefully:

   ```shell
   sudo gitlab-ctl reconfigure
   sudo gitlab-ctl hup nginx
DJ Mountney's avatar
DJ Mountney committed
   ```
### `Branch 'branch_name' was not found in this project's repository` when Web IDE and external NGINX are used

If you get this error, check your NGINX configuration file if you have a trailing slash in `proxy_pass` and remove it:

1. Edit your NGINX configuration file:

   ```plaintext
   proxy_pass https://1.2.3.4;
   ```

1. Restart NGINX:

   ```shell
   sudo systemctl restart nginx
   ```

### GitLab is presenting 502 errors and `worker_connections are not enough` in logs

If you get a `worker_connections are not enough` error in the logs, configure the NGINX worker connections to a higher value:

1. Edit `/etc/gitlab/gitlab.rb`:

   ```ruby
   gitlab['nginx']['worker_connections'] = 10240
   ```

1. Reconfigure GitLab:

   ```shell
   sudo gitlab-ctl reconfigure
   ```

The default value is [10240 connections](https://gitlab.com/gitlab-org/omnibus-gitlab/-/blob/86f98401113eb843658b63d45d58be8b706216f3/files/gitlab-cookbooks/gitlab/attributes/default.rb#L750).