600D/T3i doesn't boot and light doesn't blink
Created originally on Bitbucket by dollarside
T3i was working like charm with ML2.3. Last night I powered off, pulled the SD card, copied some photos (SD card content not cut, just copied), put it back in. I didn't power it on afterwards until earlier today when I found out that it won't power on at all.
Very similar to this guy's problem, but that thread didn't offer an answer: https://bitbucket.org/hudson/magic-lantern/issue/1473/600d-doesnt-boot-without-ml-was-dead-after
Here's what I see: I put in the charged battery, power on, nothing happens, no LCD, no red blinking light, no autofocus. Here is what I've tried (based on answers from everywhere):
- Format card
- Changed card
- Recharged battery
- Press set + power on
- Power on in different modes
- Reinstalled ML with the EOScard program
- Used the "blinktest" method (not sure if I did it right, I just put the downloaded file into the root of SD card and powered on the camera)
- Removed lens
- Talking to my camera
- Prayed
O dear lord... I really need this camera and any help is very very appreciated!!